Removing The Oil Sump Guard; Removing The Right And Left Sides - APRILIA pegaso 650 i.e. Service Manual

Pegaso 650 I.E.

7.1.3 REMOVING THE OIL SUMP GUARD

Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
a
WARNING
Wait until the engine and the exhaust silencer have
completely cooled down.
N
Position the vehicle on the stand.
N
Unscrew and remove the four screws (1).
Oil sump guard screw driving torque: 6 Nm (0.6 kgm).
a
CAUTION
Handle the plastic and painted components with care
to avoid scraping or damaging them.
N
Remove the oil sump guard (2).
NOTE
If the deadening material inside the oil sump
guard (2) is deteriorated, contact an aprilia Official Dealer
to have it changed.

7.1.4 REMOVING THE RIGHT AND LEFT SIDES

Carefully read 0.5.4 (REASSEMBLING THE COMPO-
NENTS).
a
WARNING
Wait until the engine and the exhaust silencer have
completely cooled down.
N
Remove the saddle, see p 7.1.7 (REMOVING THE SAD-
DLE).
N
Unscrew and remove the four screws (3).
Side cover screw driving torque: 3 Nm (0.3 kgm).
N
Remove the side cover (4).
a
CAUTION
Handle the plastic and painted components with care
to avoid scraping or damaging them.
NOTE
If the heat-resistant material inside the oil sump
guard is deteriorated, replace it.
Release 00/2002-02
CHASSIS
7 - 7
- 00