Changing The Front - APRILIA pegaso 650 i.e. Service Manual

Pegaso 650 I.E.
6.16.2 CHANGING THE FRONT DIRECTION
INDICATOR BULBS
Carefully read 6.16 (CHANGING THE BULBS).
N
Position the vehicle on the stand.
N
Unscrew and remove the two screws (1).
N
Remove the protection screen (2).
a
CAUTION
Upon reassembly, correctly position the protection
screen in its seat. Tighten the screw (1) moderately
and carefully, to avoid damaging the protection
screen.
N
Press the bulb (3) slightly and rotate it anticlockwise.
N
Extract the bulb (3) from its seat.
a
CAUTION
Insert the bulb in the bulb socket, making the two
bulb pins coincide with the relevant guides on the
socket.
N
Correctly install a new bulb of the same type.
6.16.3 CHANGING THE REAR DIRECTION
INDICATOR BULBS
Carefully read 6.16 (CHANGING THE BULBS).
N
Position the vehicle on the stand.
N
Unscrew and remove the screw (4).
a
CAUTION
While removing the protection screen, proceed care-
fully in order not to break the cog.
N
Remove the protection screen (5).
a
CAUTION
Upon reassembly, correctly position the protection
screen in its seat. Tighten the screw (4) moderately
and carefully, to avoid damaging the protection
screen.
N
Press the bulb (6) slightly and rotate it anticlockwise.
N
Extract the bulb (6) from its seat.
a
CAUTION
Insert the bulb in the bulb socket, making the two
bulb pins coincide with the relevant guides on the
socket.
N
Correctly install a new bulb of the same type.
a
CAUTION
If the bulb socket (7) goes out of its seat, insert it cor-
rectly, making the bulb socket opening coincide with
the screw seat.
Release 00/2002-02
ELECTRIC SYSTEM
6 - 37
- 00