Disassembling The Rear Wheel; Bearings - APRILIA pegaso 650 i.e. Service Manual

CHASSIS

7.3.13 DISASSEMBLING THE REAR WHEEL

BEARINGS

Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
N
Remove the rear wheel, see 7.3.1 (REMOVING THE
REAR WHEEL).
N
Use a cloth to clean both sides of the hub.
Work from the right-hand side of the wheel:
NOTE Have the appropriate special tool m to hand:
– aprilia part# 8140180 (Kit for bearings in the range
Ø10 mm to Ø 30 mm).
N
Use a special extractor to extract the right bearing (1).
N
Retrieve the inner spacer (2).
Work from the left-hand side of the wheel:
N
Remove the left spacer (3).
N
Remove the seal (4).
N
Remove the snap ring (5).
NOTE
The elastic ring (5) is provided only on the left
side of the wheel.
NOTE
Have the appropriate special tool m to hand:
– aprilia part# 8140180 (Kit for bearings in the range
Ø10 mm to Ø 30 mm).
N
Use a special extractor to extract the left bearing (6).
N
Thoroughly clean the inside of the hub.
NOTE
Wash all the components with a clean deter-
gent.
7 - 50
- 00
Pegaso 650 I.E.
Release 00/2002-02