APRILIA pegaso 650 i.e. Service Manual page 63

Pegaso 650 I.E.
Leave the brake fluid tank open ONLY for the time
necessary for topping up.
N
Raise and remove the cover (3) together with the
screws (1) (2).
N
Remove the gasket (4).
a
CAUTION
In order not to spill the brake fluid while topping up,
do not shake the vehicle.
Do not put additives or other subtances into the fluid.
If you use a funnel or other similar items, make sure
that they are perfectly clean.
NOTE
In order to reach the "MAX" level, top up until
covering the glass (5) completely, with the brake fluid res-
ervoir rim parallel to the ground.
N
Fill the tank (6) with brake fluid, see 1.6 (LUBRICANT
CHART), until reaching the correct level.
a
CAUTION
Do not exceed the "MAX" level while topping up.
It is advisable to top up until reaching the "MAX" lev-
el only with new pads.
Do not reach the "MAX" level with worn out pads,
since this will cause a fluid outflow when the pads
are changed.
N
Put back the gasket (4) in its seat correctly.
N
Put back the cover (3).
N
Screw and tighten the screw (2).
N
Screw and tighten the screw (1).
a
WARNING
Check the braking efficiency.
Release 00/2002-02
SERVICE AND SETTING UP
2 - 25
- 00