Draining The Rear Braking System - APRILIA pegaso 650 i.e. Service Manual

Pegaso 650 I.E.
ã
Follow
PARTIAL REMOVAL
N
Remove the rear wheel, see 7.3.1 (REMOVING THE
REAR WHEEL).
N
Withdraw the brake caliper (4) (complete with plate),
leaving it constrained to the pipe (5) (or releasing it if
you are carrying out a COMPLETE REMOVAL).
a
CAUTION
Never pull the rear brake lever after removing the cal-
ipers, otherwise the pistons may go out of their
seats, thus causing the outflow of the brake fluid.
REASSEMBLY
See 7.3.18 (INSTALLING THE REAR WHEEL).
In case of complete removal:
N
Carry out the COMPLETE REMOVAL operations in the
reverse order.
a
WARNING
After reassembly, pull the rear brake lever repeatedly
and check the correct functioning of the braking sys-
tem.

7.6.6 DRAINING THE REAR BRAKING SYSTEM

See 7.5.6 (DRAINING THE BRAKING SYSTEMS).
Release 00/2002-02
CHASSIS
7 - 69
- 00