Removing The Idling Speed Adjustment Cable - APRILIA pegaso 650 i.e. Service Manual

FUEL SUPPLY SYSTEM
REMOVING THE COLD START LEVER
N
Remove the snap ring (11), taking the washer (12).
N
Release the spring (13) of the cold start control lever
(14).
N
Remove the cold start lever (14), trying to find the best
position from which it can be withdrawn.
REMOVING THE THROTTLE VALVE SENSOR
For the replacement and the setting, see 4.9.9 (CHANG-
ING AND ADJUSTING THE THROTTLE VALVE PO-
TENTIOMETER).
4.9.4 REMOVING THE IDLING SPEED ADJUSTMENT
CABLE
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
The removal and reassembly of the idling adjustment ca-
ble can be carried out with the throttle body mounted on
the vehicle.
N
Remove the saddle, see p 7.1.7 (REMOVING THE
SADDLE).
N
Release the idling speed adjustment cable (15) from
the cable guide positioned behind the right standard of
the frame.
N
Unscrew completely by means of the adjusting knob
(16).
N
Remove the idling speed adjustment cable (15), togeth-
er with the spring (17).
a
CAUTION
Upon reassembly, adjust the idling speed, see 2.9.2
(IDLING ADJUSTMENT).
4 - 18
- 00
Pegaso 650 I.E.
Release 00/2002-02