Removing The Final Drive Gears - APRILIA QUASAR 125 2003 Workshop Manual

ENGINE
2 2
1
4
3
8
10
12
6
3
- 38 -
00

3.6.11 REMOVING THE FINAL DRIVE GEARS

"
Drain off all transmission oil, see 2.12 (CHECKING THE TRANSMISSION
1
OIL LEVEL).
"
Remove clutch, see 3.6.5 (REMOVING THE CLUTCH AND THE
SECONDARY BELT ROLLER).
NOTE
"
Loosen and remove the seven screws (1).
"
Remove the right casing (2).
"
Working on the left casing, remove the following parts in the given order:
- reverse gear shaft (3)
1
- forward gear shaft (4)
- clutch shaft (5)
The following operations apply to the right casing.
"
Remove from shaft (6) the following parts in the given order:
- the snap ring
- the fixed washer(7)
- the toothed gear (8)
- the fixed washer (9)
- the snap ring (10).
"
Loosen and remove nut (11). Save the washer.
5 "
Remove the rear sprocket (12).
"
Remove the selector belt roller (13).
7
9 6
11
13
Block off the final drive casing with a cloth to collect any oil leaks.
QUASAR 125-180
Release 00/2003 - 09