Injection Power Supply Diagram; Troubleshooting - APRILIA pegaso 650 i.e. Service Manual

ELECTRIC SYSTEM
 ).*%#4)/. 3934%-

6.4.1 INJECTION POWER SUPPLY DIAGRAM

Key
1) Battery
2) Ignition key
3) Unit
4) Injection relay
5) Fall sensor
6) To voltage regulator

6.4.2 TROUBLESHOOTING

N
Make sure that the 20 A main fuse and the 7.5 A fuse
are in good condition.
N
Verify the correct operation of the Kill switch device,
see 6.7 (IGNITION SAFETY SYSTEM) and of the key,
see 6.5 (IGNITION/INJECTION SYSTEM).
N
Check the injection relay, see 6.4.3 (CHECKING THE
INJECTION RELAY).
N
Check the fall sensor, see 6.4.4 (CHECKING THE
FALL SENSOR).
6 - 8
- 00
7) To the cooling fans
8) Kill switch
9) Light loads
10) To the water temperature thermistor, the air
temperature thermistor, the accelerator sensor.
11) Fuel pump, injectors, coil power supply.
Pegaso 650 I.E.
Release 00/2002-02