Changing And Adjusting The Throttle Valve Potentiometer - APRILIA pegaso 650 i.e. Service Manual

Pegaso 650 I.E.
4.9.9 CHANGING AND ADJUSTING THE THROTTLE
VALVE POTENTIOMETER
With the engine switched off:
N
Remove the throttle body, see 4.9.2 (REMOVING THE
THROTTLE BODY).
N
Disconnect the four-way connector (coloured black) (1).
a
CAUTION
The two screws (2) fastening the throttle valve poten-
tiometer are painted and can only be removed or
slacken in the event the actual sensor is replaced.
NOTE
In order to make it easier to unscrew the screws
(2) secured using LOCTITE
hot air blower.
N
Unscrew and remove the screws (2).
N
Remove the potentiometer (3).
a
CAUTION
After reassembly, adjust the idling speed, see 2.9.2
(IDLING ADJUSTMENT).
For further information, see 6.5.6 (CHECKING THE
THROTTLE VALVE POTENTIOMETER).
Release 00/2002-02
®
243, heat them first with a
FUEL SUPPLY SYSTEM
4 - 23
- 00