Removing The Front Fairing - APRILIA pegaso 650 i.e. Service Manual

Pegaso 650 I.E.

7.1.24 REMOVING THE FRONT FAIRING

Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
a
WARNING
Let the engine cool down until it reaches room tem-
perature.
N
Remove the dashboard fairing, see 7.1.27 (REMOV-
ING THE DASHBOARD FAIRING).
N
Disconnect the electric connector (1) of the headlight.
~ Disconnect the electric connectors of the front direc-
tion indicators (2) (3).
~ Unscrew and remove the screw (4), retrieving the
rubber element if necessary.
Front fairing rear screw driving torque: 25 Nm (2.5
kgm).
~ Unscrew and remove the screw (5).
Front fairing side screw driving torque: 25 Nm (2.5
kgm).
N
Unscrew and remove the screw (6).
Front fairing upper screw driving torque: 25 Nm (2.5
kgm).
N
Unscrew and remove the screws (7).
Front fairing front screw driving torque: 25 Nm (2.5
kgm).
N
Unscrew and remove the screw (8), releasing the cable
guide collar (9) and if necessary take the rubber ele-
ment.
NOTE
Upon reassembly, position the cable guide col-
lar (9) correctly.
a
CAUTION
Proceed with care.
Do not damage the tangs and/or their seats.
Handle the painted components with care and avoid
scraping or damaging them.
N
Slightly open the lower part of the fairing and at the
same time move it slightly forward.
N
Remove the fairing (10), complete with headlight, front
direction indicators, screen (11) and transparent front
part of the fairing (12).
NOTE
Upon reassembly, position the front fairing cor-
rectly, making all the coupling and fastening points coin-
cide.
N
Where necessary, remove the headlight, see 7.1.25
(REMOVING THE HEADLIGHT) and the direction indi-
cators, see 7.1.43 (REMOVING THE FRONT DIREC-
TION INDICATORS).
Release 00/2002-02
CHASSIS
7 - 21
- 00