APRILIA pegaso 650 i.e. Service Manual page 119

Pegaso 650 I.E.
 2%-/6).' 4(% &5%, 3500,9 05-0
N
Remove the whole fuel supply pump unit, see 4.3 (RE-
MOVING THE WHOLE FUEL SUPPLY PUMP UNIT).
NOTE Have the appropriate special tool m to hand:
– aprilia part# 0277295 (hose clamp installation pliers).
a
CAUTION
Upon installation, replace the hose clamp that has
been removed with a new one having the same di-
mensions, see 0.4.2 (SPARE PARTS CATALOGUES).
Do not attempt to reinstall the removed hose clamp,
since it is unusable.
Do not replace the removed hose clamp with a screw
clamp or with other types of clamp.
N
Release the hose clamp (1).
N
Pull the fuel pipe (3) off the pump (2).
N
Disconnect the electric connector (4).
a
CAUTION
When reassembling, make sure the electric connec-
tor (4) is plugged in properly.
N
Unscrew and remove the screw (5).
Fuel pump screw driving torque: 10 Nm (1.0 kgm).
a
CAUTION
When performing the operations below, take care not
to entangle the electric cables.
N
Remove the fuel pump (6), taking the clamp (7).
a
CAUTION
If the filtering mesh (8) features traces of sediments,
clean it using a compressed air jet directed so that
the impurities do not get inside.
Release 00/2002-02
FUEL SUPPLY SYSTEM
4 - 7
- 00