Removing The Chain Rollers And Shoe - APRILIA pegaso 650 i.e. Service Manual

Pegaso 650 I.E.

7.1.40 REMOVING THE CHAIN ROLLERS AND SHOE

Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
REMOVING THE LOWER ROLLER
N
Position the vehicle on the stand.
N
Unscrew and partially withdraw the screw (1) (leave the
screw inserted as much as necessary to keep the rear
brake pedal in its position) and take the nut (2).
Chain lower roller screw driving torque: 25 Nm (2.5
kgm).
N
Retrieve the washer, the roller (3) and the special spac-
ing bush (plastic material + metal).
REMOVING THE UPPER ROLLER
N
Position the vehicle on the stand.
N
Unscrew and remove the screw (4).
Chain upper roller screw driving torque: 20 Nm (2.0
kgm).
N
Retrieve the two washers, the roller (5) and the special
spacing bush (plastic material + metal).
REMOVING THE SHOE
N
Remove the pinion (6), see 7.1.39 (REMOVING THE
DRIVE PINION)
N
Unscrew and remove the two screws (7).
Driving chain shoe screw driving torque: 5 Nm (0.5
kgm).
N
Introduce a screwdriver in the appropriate hole (8).
N
Remove the shoe (9), withdrawing it from the front.
Release 00/2002-02
CHASSIS
7 - 31
- 00