APRILIA pegaso 650 i.e. Service Manual page 127

Pegaso 650 I.E.
To reassemble:
a
CAUTION
Replace all the gaskets, O-rings, torsion springs,
bushes and seals. These components are supplied
with the repair kit.
NOTE
The seals (14) (15) have different dimensions,
therefore do not invert them upon reassembly.
N
Fit the new seals (14) (15) on both injector.
N
Install the injectors (3) on the manifold (fuel rail), align-
ing the groove (16) with the edge of the injector seat
(17), (see figure).
NOTE
Install the clips (13) making the seats (18) coin-
cide with the injector seat edge (17) and the seat (19) co-
incide with the tang (20).
N
Install the clips (11) correctly .
N
Install the manifold (fuel rail) (2) complete with injectors
(3) on the throttle body (1).
N
Screw and tighten the screws (12).
N
Connect the two rapid couplings (8) correctly.
N
Connect the two connectors (9) (10) correctly .
See 6.5.5 (CHECKING THE INJECTORS) for the
checking procedure.
N
Put back the saddle, see 7.1.7 (REMOVING THE SAD-
DLE).
Release 00/2002-02
FUEL SUPPLY SYSTEM
4 - 15
- 00