Adjusting The Throttle Body - APRILIA pegaso 650 i.e. Service Manual

FUEL SUPPLY SYSTEM

4.9.8 ADJUSTING THE THROTTLE BODY

N
Remove the throttle body, see 4.9.2 (REMOVING THE
THROTTLE BODY).
SETTING IDLING
a
CAUTION
The screw (1) of the throttle valve end of stroke is
painted and must not be adjusted.
The adjusting screw (1) can be set again only in case
of complete replacement of the throttle valve lever
and of the throttle body.
N
Unscrew the adjusting screw (1) of the throttle valve
end of stroke, until the throttle valves (2) adhere to the
throttle body (3).
N
Screw the adjusting screw (1) until it touches the stop
onto the throttle valve control lever (4), and turn it an-
other 1/2 – 3/4 turn.
Idling setting: 1/2 – 3/4 turn.
N
Mark the new position of the screw (1).
4 - 22
- 00
Pegaso 650 I.E.
Release 00/2002-02