Chassis
•
Operating on both sides, loosen the
swingarm pin tightening nut.
•
Working on the left side, unscrew and
remove the nut and collect the washer.
See also
Removal
Removing the
rear wheel
Removing
•
Working from the right side of the ve-
hicle, unscrew and remove the nut and
retrieve the washer.
•
Then loosen the tightening ring with the
suitable special key.
Specific tooling
866714 Tools for the swingarm nut adjustment
•
Lightly tap with a rubber hammer, slide the swingarm pin off the left side of the vehicle.
•
If necessary, remove the rear mudguard and the chainguard.
Installing
Drive chain
Removing
•
Support the vehicle with the optional
rear stand.
•
Loosen the chain tension, by unscrew-
ing the rear adjuster screws.
•
Identify the master link; slide off the
clip.
•
Remove the plate underneath.
•
Collect the chain.
CHAS - 170
RS4 50 MY2011