RS 125
7.10.4.
CHANGING FRONT FORK OIL
Read
1.2.1
carefully.
Oil quantity: 430±2.5 cu cm; see
Oil specifications; see
NOTE The operations described below apply to both fork
legs.
DRAINING OIL
•
Perform the first six steps of the procedure described
at paragraph
7.10.3.
FILLING
•
Place the slider upright in a vice with soft jaws.
•
Fill fork fluid into the slider.
•
Position the spring cup (1).
•
Insert the two half-rings (2).
•
Check the O-ring is in place and tighten the top cap (3).
1.7.1.
1.8.1.
3
CHASSIS
2
1
7 - 93