Chrysler 2005 Crossfire SRT6 Service Manual page 2501

ZH
(P0600) NO TRANSMISSION BUS MESSAGE (CONTINUED)
9.
CAN C BUS (-) CIRCUIT SHORT TO VOLTAGE
With the ignition on.
Measure the voltage of the CAN C BUS (-) circuit at the PCM C4 har-
ness connector.
Is the voltage below 1.0 volt?
Yes >> Go To 10
No >> Repair the CAN C BUS (-) circuit for a short to voltage.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
10.
CAN C BUS (-) CIRCUIT SHORT TO GROUND
Turn the ignition off.
Measure the resistance between ground and the CAN C BUS (-) cir-
cuit.
Is the resistance above 100 kohms?
Yes >> Repair the CAN C BUS (+) circuit for a short to ground.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
No >> Repair the CAN C BUS (-) circuit for a short to ground.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
ENGINE - ELECTRICAL DIAGNOSTICS 9 - 577