Chrysler 2005 Crossfire SRT6 Service Manual page 2500

9 - 576 ENGINE - ELECTRICAL DIAGNOSTICS
(P0600) NO TRANSMISSION BUS MESSAGE (CONTINUED)
7.
CAN C BUS (+) CIRCUIT OPEN
With the ignition off.
Measure the resistance of the CAN C BUS (+) circuit from the PCM
C4 harness connector to the SKREEM C2 harness connector.
Is the resistance below 5.0 ohms?
Yes >> Go To 8
No >> Repair the CAN C BUS (+) circuit for an open.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
8.
CAN C BUS (+) CIRCUIT SHORT TO VOLTAGE
Turn the ignition on.
Measure the voltage of the CAN C BUS (+) circuit at the PCM C4 har-
ness connector.
Is the voltage below 1.0 volt?
Yes >> Go To 9
No >> Repair the CAN C BUS (+) circuit for a short to voltage.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
ZH