ZH
VALVE STEM SEAL
REMOVAL
Note: The tools used in these valve stem seal procedures are part of Special Tool 9106 Valve Assembly Tool
Case.
1. Remove the starter. (Refer to 8 - ELECTRICAL/STARTING/STARTER MOTOR - REMOVAL)
2. Remove the camshafts. (Refer to 9 - ENGINE/CYLINDER HEAD/CAMSHAFT(S) - REMOVAL).
3. Remove one spark plug from the cylinder to be repaired.
4. Position the cylinder to be repaired to TDC.
5. Using Special Tool 9102 Flywheel Locking Tool,
lock the flywheel by inserting the tool into the
starter opening.
6. Pressurize the combustion chamber. (Refer to 9 -
ENGINE - DIAGNOSIS AND TESTING).
7. Install the assembly tool (1). Compress the valve
spring.
ENGINE - 3.2L SERVICE INFORMATION 9 - 755