Transmission Shaft - MOTO GUZZI Daytona RS Workshop Manual

15.4

TRANSMISSION SHAFT

Replace the shaft with drive joints every 20.000 Km; if used for sporting purposes, or used at continuous high
speeds, replace every 15.000 Km.
For transmission shaft lubrication see Par. 4.5.
DIAGRAM FOR THE ASSEMBLY OF THE REAR TRANSMISSION ASSY
Tightening torque
3÷3,2 kgm
Tightening torque
4 kgm
WARNING !
In order not to damage the drive shaft - joint unit, if the unit is replaced, it is essential that the drive joint
is reassembled in the position shown in the Fig. 15-20.
DIAGRAM FOR THE TRANSMISSION UNION POSITIONS
136
SCREWA LOCTITE 601
MOUNTED
Tightening torque
2,8 ÷ 3 kgm
Tightening torque 4 kgm
B
A
Tightening torque
5÷5,5 kgm
Tightening
torque 5 kgm
Tightening torque
8 kgm
15-19
15-20