Rear Brake Pedal Adjustment; Adjusting The Steering - MOTO GUZZI Daytona RS Workshop Manual

5.3 REAR BRAKE PEDAL ADJUSTMENT (Fig. 05-03)
Check that brake pedal «A» has an idle stroke of approx. 5÷10 mm. before the end of rod «B» comes into contact
with the brake pump master cylinder; otherwise alter the length of rod «B» by tightening or untightening it, after
having loosened off lock nut «C».
To change the position of the pedal «A», loosen the screw «D» and adjust the cam «E»; at the same time vary
the length of the rod «B» until the correct clearance is obtained.
B
C
A
DAYTONA RS / SPORT 1100 I
5.4 ADJUSTING THE STEERING (Fig. 05-04)
To ensure safe riding, the steering should be adjusted in such a way as to allow free movement of the handlebars
without any play.
• loosen the steering head fixing bolt «A»;
• undo the steering head nut «B»;
• turn the adjuster nut «C» to take up any play.
When the play has been adjusted, tighten nut «B» and the steering head fixing bolt «A».
B
DAYTONA RS / SPORT 1100 I
E
D
05-03
C
A
05-04
B
C
D
A
V10 CENTAURO
B
A
V10 CENTAURO
E
05-03
C
05-04
23