Table of Contents
Advertisement
Available languages
Available languages
10
ENGINE UNIT
10.1
DISMANTLING THE ENGINE ASSEMBLY
(SPORT 1100 I)
NOTE: pages 68 and 69 show the explosion
views of the most important motor assemblies.
To dismantle the engine assembly, proceed as follows:
– Loosen screws «A» - Fig. 10-01 that secure the
head cover and remove the cover.
– Turn the crankshaft to the T.D.C. position at the combustion stroke (valves closed) of the L.H. cylinder
Fig. 10-02.
NOTE: This operation can be done even when the gearbox is assembled to the motor block, as the
notch position can be checked through the hole shown in Fig. 10-03.
42
10-02
A
10-01
10-03
Advertisement
Chapters
Table of Contents
