MOTO GUZZI Daytona RS Workshop Manual page 145

Table of Contents

Advertisement

Available languages

Available languages

- Unscrew the cap of the fork arm using a size 24 polygonal spanner Fig. 17-03. Release from the clamp the
fork arm, then slide the external tube down until the ledge of the lower leg is reached Fig. 17-04.
- Insert a stud (diameter max: 5mm) or a small Allen wrench in one of the cartridge holes Fig. 17-05.
- Turn the spring a little, in order to free the plates so that it is possible to remove them Fig. 17-05.
- Remove the pre loading steel bush ring which is on the spring Fig. 17-06. Then let the cartridge come down
slowly (stopping) in the internal arm.
- Remove the spring slowly from the fork arm Fig.17-07 so that the oil can flow.
17-04
17-06
17-03
17-05
17-07
143

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

V10 centauro1100 sportSport 1100Daytona rs

Table of Contents