Checking The Secondary Shaft - MOTO GUZZI Norge 1200 Service Manual

Engine

Checking the secondary shaft

Measure the coaxiality of the transmission shaft
with a dial gauge and a centring device and re-
place it if not complying with specifications.
Characteristic
Shaft coaxiality limit
0.08 mm (0.0031 in)
Check transmission gears for signs of pitting and wear and replace damaged gears if necessary.
Check the gear fitting teeth for cracks, damage and wear and replace those damaged if necessary.
Check the transmission gears movement and, if it is not regular, replace the damaged part.
Checking the desmodromic drum
Check gear drum for damage, scratches and wear
and replace the desmodromic if necessary.
Check the desmodromic segment «3» for damage
and wear and replace it if necessary.
Check the desmodromic bearing «4» for damage
and cracks and replace it if necessary.
Checking the forks
NOTE
THE FOLLOWING PROCEDURE IS VALID FOR ALL TRANSMISSION FORKS.
•
Check the transmission fork cam roller
«1» and the transmission fork tooth
«2» for damage, deformation and
wear.
•
Replace the transmission fork if nec-
essary.
ENG - 18
Norge 1200