Kärcher Puzzi 300 Manual page 13

English
Working tips
• The more sensitive the carpet, the
smaller the amount of cleaning
agent
• Carpets with jute backings can
shrink and the colours can bleed if
the treatment is too wet
• High pile carpets should be
brushed off first
• Cleaning with warm water
(up to max. 50°C) is more effective
• Spray very dirty areas beforehand
• Work from light to dark areas
(from window to doors)
• Work from clean areas to dirty
ones
• Treat carpet with Care Tex
RM 762 after cleaning
(accessory).
• Wait until cleaned surface is dry
before walking on it
• Use de-foaming agent
RM 761 (accessory) for
shampooed carpets.
Puzzi 300 / 300 S / 400
AFTER OPERATION
Storage
! Remove unused cleaning fluids
from the housing with suction hose
! Remove the floor nozzle and hold
suction hose in a fresh-water tank.
Turn "Suction" switch on. The
cleaning fluid removed by suction
is collected in the dirty-water tank
! Empty the dirty-water tank
! Fill fresh-water tank with 5l clean
water
! Switch on spray switch
! Activate valve handle and rinse
out unit for approx. 2 min.
! Switch off unit and pull the power
plug.
CARE AND MAINTENANCE
Service agreement:
A maintenance contract for this unit
can be signed with a Kärcher
authorised dealer.
! Remove the cover
Unscrew the (1) float
Clean the (2) fluff strainer
Clean the (1) fresh water strainer
Clean the float switch (2)
(only Puzzi 400)
13