Kärcher Puzzi 300 Manual page 12

English
Cleaning
Activate valve handle
(Puzzi 300 / 300 S)
Activate valve handle (Puzzi 400)
The cleaning agent solution is
sprayed and simultaneously sucked
in.
Puzzi 300 / 300 S / 400
Drive on the surface to be cleaned in
overlapping paths. Repeat as
necessary.
Note:
When the dirty-water tank is full, the
suction air is interrupted by the
mechanical floating switch.
! Switch off spray and suction
switch
! Remove the cover
! Remove dirty-water tank (1) and
empty, or empty using a drain
hose (2)
CLEANING METHODS
Normal dirty carpets
• Spray cleaning solution and use
suction immediately
• Using suction again shortens the
drying time
Very dirty carpets
• Only spray cleaning solution
• Wait 10-15 min.
• Use suction to remove cleaning
solution
Cleaning upholstery
• Attach the hand nozzle (special
attachment) instead of floor nozzle
for cleaning upholstery
• Use the appropriate attachments
for cleaning steps, wall carpets, or
motor vehicle-interiors
• For sensitive materials use lower
amounts of the cleaning agent,
spray the surface from
approx. 200 mm away. Use
suction afterwards to remove
solution
Rinsing
• One obtains a better result when
the surface to be cleaned is rinsed
again with clear water
• Remains of the cleaning agent
and loosened dirt are then rinsed
out
12