Kärcher Puzzi 300 Manual page 14

English
Clean nozzle mouth piece
(Puzzi 300 / 300 S)
Unscrew the union nut
Clean nozzle mouth piece (1)
(Puzzi 400)
Puzzi 300 / 300 S / 400
FAULT INSTRUCTIONS
Unit does not suck cleaning agent
• Clean strainer in the water tank
• Check the spraying hose
Insufficient operating pressure
• Screw in new nozzle mouth piece
and align
Spray pump does not function
(only Puzzi 400)
• Fill reservoirs
! Remove cover.
! Use a screwdriver to make the
pump rotate a few times.
Warning:
Turn the appliance off and pull the
mains plug out of the socket.
Sprays only on one side
• Cleaning
Insufficient vacuum
• Place the cover on correctly.
• Remove the cover, check the float
• Replace the suction turbine
Float closes suction supports
• Empty dirty-water tank
• Use de-foaming agent RM 761
(accessory) and thus prevent foam
formation
CLEANING AGENT
Cleaning carpet and upholstery
RM 760, 10 kg
D,A,GB,I,E,FIN,S,N,
DK,F,NL/B 6.291-388
P 6.290-104
RM 760, 16 Tabs
D,A,CH,GB,F,I,NL,B, 6.290-828
E,P,GR,DK,N,S,FIN,
H,CZ,PL,SL,TR,RS,
SK,SR,HR,BG
RM 760, 200 Tabs
D,GB,A,H,CZ,I,P,E,GR 6.290-500
F,NL/B,FIN,S,N,DK 6.290-529
RM 764, 10 l
D,GB,A,I,E,GR 6.291-386
FIN,S,N,DK,F,NL/B 6.291-387
De-foamer
RM 761,10 x 200 ml
D,A,GB,I,E,GR 6.291-397
FIN,S,DK,F,NL/B 6.291-398
Carpet impregnator
RM 762, 6 x 1 l
D,A,CH,I,F,NL/B 6.290-001
GB,E,P,GR 6.290-496
FIN,S,N,DK 6.290-497
RM 762, 5 l
D,A,CH,I,F,NL/B 6.290-002
GB,E,P,GR 6.290-494
FIN,S,N,DK 6.290-495
Mite remover
RM 765, 10 l
D,A,GB,I,F,NL/B 6.290-442
FIN,S,DK,N,GR,P,E 6.290-451
14