Using The Lamination Tab; Figure 21 - Lamination - HID HDP5000 User Manual

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
3.12.12 Using the Default button
Step Procedure
1 Use the Default button to reset defaults for the current Track tab only.
3.13

Using the Lamination tab

Use this option to control specific Printer functions. These options allow you to control the
Printer's Lamination process. (Note: When no Laminator is detected, the Lamination tab is
active but all functions are grayed out.)

Figure 21 - Lamination

July 2013
© 2012, 2013 HID Global Corporation. All rights reserved.
Page 57 of 101