Backlash Inspection; Final Driven Gear Replacement - Acura 1994 Integra Service Manual

' 1 .
Place difterential assembly on V-blocks and install
both axles.
M€asure the backlash of both pinion gears.
Standard (New):0.05-O.15 mm (0.OO2-0.006 inl
3. It the bscklssh is not within the standard, reDlace
the differential carrier.
DIAL II{OICATOR
Differential (818B1 enginel
Backlash Inspection
Final Driven Gear Replacement
1 . Remove the bolts in a crisscross Datt€rn in several
steps, and remove the final driven gear from the
differential carrier.
NOTE: The final driven gear bolts have left-hand
threads.
1 0 x 1 . 0 m m
101 N.m llO.3 kgl.m, 74.5 lbf.ftl
Lelt-hand threads
FINAL DRIVEIII GEAR
Chamfer on inside diameter ot
linal driven gear taces carrier.
DIFFEREI{TIAL
CARBIER
Install the final driven gear by tightening the bolts
in a c.isscross pattern in several steps.
15-4