Acura 1994 Integra Service Manual page 110

Timing Belt
Removal lcont'd)
1 . Remove the cylinder head cover.
. Refer to page 6-78 when installing.
Remove the pulley bolt and crankshaft pulley (see
page 6-47).
Remove the middle cover and the lower cover.
NOTE:
. Do not uss the middle cover and lower cover for
storing items disassembled.
a Clean the middle cover and lower cover before
installation.
Loosen the adjusting boh 180'.
Push the tensioner to r€move tension from the tim-
ing belt, then retighten the bolt.
Remove the timing belt from the pulleys.
1 0 .
1 2 .
1 1 .
8.
a
6 x 1 . 0 m m
9.8 N.m 11,0 kgf'm, 7.2 lbl'ftl
WASHER
Replace when
or deteriorated.
CYLINDER
OOVER
Rel€r to pago 6-78
when inslalling.
NMING BELT
Adjustment, page 6-48
MIDDLE
COVER
RUABER SEALS
R e p l a c 6 w h e n
or deteriorated.
6 x 1 . 0 m m
9.8 N.m {1.0 kgf.m,
7.2 rbnftl
LOWER COVER
6 r 1 . 0 m m
9.8 N.m 11.0 kgf.m,7.2lbtftl
CRANKSHAFT PULl"EY
Remove any oil and
clean on the timing belt
guide plat6 side.
BELT
TENSIONER
TIMING BELT
GUIDE PLATE
lnstallwith concave
surface facing out.
Remove any oil
and clean.
PULI.TY BOLT
17? N m {18.0 kgf.m, 130lbtftl
ADJUSNI{G BOLT
10 x 1,25 mm
5,t N.m 15.5 kgf.m,
.(l rbf.ftt
For adjustm€nt only,
@ ^ R
v @