Inspection - Acura 1994 Integra Service Manual

Mainshaft Assembly
Inspection
1 . Inspect the gear surfaces and the bearing surfacss
for wear and damage, then measure the mainshaft
at points A, B. and C.
Standord:
A: 27.987 - 28.000 mm 11.1018 - 1.102'l inl
B: 37.98/r - 38.q)0 mm {1.il95il - l.il960 in}
Ct 27.977 - 27.99O mm {1.1015 - 1.1020 in}
S€rvico Limit;
A: 27.9{, mm (1.1(XXl in}
B:37.930 mm 11.4933 inl
C: 27.930 mm {1.0996 in}
2. Inspect for runout.
Stlnd.rd:
0.02 mm (0.(xxl8 inl M!I.
S.rvic. Limit 0.05 mm (o.qP inl
N O T E : S u D p o r t t h e m a i n s h € f t a t b o t h e n d s a s
shown.
Inspect oil passages tor clogging.
l f t h e r u n o u t i s m o r 6 t h a n t h s s e r v i c e l i m i t ,
rsplace the mainshaft with a n6w one.
lf any parts of the mainshaft are less thsn the
service limit. .eolace mainshaft with a new one.
13-26