Acura 1994 Integra Service Manual page 999

Dashboard
Component Removal/lnstallation (cont'dl
5. Remove the knee bolster.
: Bolt locations, 3
f i
6 r t . o m m
6 i;i'i#.,
7.2 tbr.ftl
?
KNEE
6. Installation is the reverse of the removal Drocedure.
Stol€o radio/cassette, Heater control panal removal:
1 . Remove the rear console, then remove the front con-
s o l e ( s e e p a g e 2 0 - 1 2 8 ) .
Loosen the bolts, then remove the stereo radio/
cassette by pulling it out.
Disconnect the connector and antenna lead.
NOTE: The original radio has a coded theft protec-
tion circuit, Be sure to get the customer's code num-
ber belore
- disconnecting the battery.
removing the No. 32 17.5A) fuse from the under-
hood fuse/relay box.
- removing the radio.
After service, reconnect power to the radio and turn
i1 on. When the word "CODE" is displayed. enter
the customer's 5-digit code to restore radio
operation.
20-132
CONNECTOR
CASSETTE
i Bolt locations. 2
6 x 1 . 0 m m
9 . 8 N . m { 1 . 0 k g l . m ,
3,
Carefully pry the hazard warning switch and rear
window defogger switch out of the heater control
Daner.
Disconnect the connectors.
HAZARD WARNING
swtTcH
REAR WINOOW
DEFOGGER SWITCH