1 1 .
Pull the steering gearbox all the way down to clear
the pinion shaft from the bulkhead, and remove the
pinion shaft grommet.
Move the steering gearbox to the right so the left
rack gnd clears the rear beam.
Hold the steering gearbox and slide the rack all the
way to the left, then place the left rack end below
the rear beam.
Move the steering gearbox to the left. and tilr the
left side down to remove it from the car.
1 8 .
1 9 .
PINION SHAFT GROMMET
STEEBING GEARBOX
17 -47