Acura 1994 Integra Service Manual page 990

Child Seat Anchor Plate
Attachment points are provided for a rear seat mounted
child restraint system which uses a top tether,
The attachment points are located on the rear trim panel
or rear shelf, just behind the rear seat-back.
When using a child seat with a top tether, installthe child
seat anchor plates securely.
Hatchback
NOTE: The rear trim panel has perJorations at each
attachment point. Cut the rear trim panel along the
perforations to make a hole,
Sedan
NOTE: Remove the plug covers from the attach-
ment points of the rear shelf (Canada).
Use a razor blade or sharp knife to carefully cut a
1 inch diameter circle at the location of the attach-
ment point (USAI.
265 mm
( 1 0 . 4 i n l
IOO mm
13.94 inl
BEAR TRIM PANEL
ATTACHMENT POINTS
TOOTHED WASHER
N O T E :
a Do not remove the toothed washer from the child
seat anchor plate. Use the child seat anchor plate
with the toothed washer attached to it.
a When installing a child seat on the rear seat, fol-
low the intructions of the manufacturer of the
child seat,
a Additional anchor plates are available.
a Do not use the child seat anchor plate for any
other puipos€; it is dosigned exclusively tor in-
stallation of a child seat.
a Mako sure tho roar seat-back is locked firmlv
wh€n installing a child soat.
REAR SHELF
20-123