Installation (818B1 Engine) - Acura 1994 Integra Service Manual

Installation (B18Bl engine)
2.
Adjust the length A of the piston pin driver.
A:81881 engine:49.70 mm {1.957 inl
Bl8Cl €ngin€:51.70 mm {2.035 inl
PISTON PIN DRIVER HEAD
07973 - PE00320
PISTON PIN DRIVER SHAFT
07973 - PE00310
PILOI COLLAR
07LAF - PR30100
Embossed mark facing up.
NOTE: Use a hydraulic press.
When pressing pin in or out,
make sure that the recessed
portion of the piston aligns
with the lips on the collar.
Place the piston on the piston base and press the
pin out with a hydraulic press.
1. Use a hvdraulic oress for installation.
When pressing the pin in or out, be sure to posi-
tion the recessed flat on the piston against the
lugs on the base attachment.
The arrow must face the
timing belt side o{ the
engine and the connecting
rod oil hole must face the
rear side of the engine,
otl Hols
2. Adjust the length B of the piston pin driver.
B: 49.70 mm (1.957 inl
PISTON PIN DRIVER HEAD
07973 - PEfl)320
PISTON PIN DR|VEN SHAFT
079?3 - PE|X)310
Embossed mark
ffi*.r,"ror","l
PILOT COLLAN
07LAF - PF301(x)
PISTON PIN BASE INSERT
07GAF- PH603oO
PISTON BASE HEAD
07HAF - PL20t02
PISTON BASE
079?3 - 6570500
NOTE: lnstall the assembled piston and rod with
the oil hole facing the intake manifold.
7 -19