Acura 1994 Integra Service Manual page 171

Englne Oil
Replacement {cont'd)
API CERTIFICATION
SEAL
The numbers in the middle of the API Service label tell
you the oil's SAE viscosity or weight. Select the oil for
your car according to this chart:
Ambient TomDo?aturo
An oil with a viscosity of 5W-3O is preferred for improved
fuel economy and year-round protection in the car.
You may use a l OW-3O oil it the climate in your area is
limited to the tempe.ature range shown on the chart.
4. Fillthe engine with oil up to the specified level, .un
the engine for more than three minutes. then check
lor oil leakage and oil level.
ElrclltEs
Oil Filter
Replacement
CAUTION: Aftar the ongine has boan run. tho oxhaust
pipos will bo hot; b€ caretul when wo.king around tho
erhaust manitold,
Remove the oil tilter with the special oil filter wrench.
Inspect the threads and rubbe. sealon the new lilter.
Wipe off seat on engine block. then apply a light coat
of oil to the tilter rubber seal,
NOTE: Use only filrers with a built-in bypass system.
Inspect threads and
rubber seal surface-
Apply oil to rubber seal
betore anstalling.
ENGINE OIL COOLER
(8'l8Cl ongino onlyl
8-6