Acura 1994 Integra Service Manual page 955

Moonroof
Remove the frame (see page 20-87).
Remove the drain channel.
NOTE: Take care not to damage, twist or litt the
seal.
4.
Remove the motor (see page 20-87).
5. Remove the front drain channel.
6. Remove the nut, then remove the front rail holder.
9.8 N.m {1.O kgf.m,
7 .2 tbt-lrl
9, Slide the glass bracket/slider, liJter backward, then remove it.
Glass Bracket/Slider, Lifter, Guide Rails and Cable Assembly Replacement -
1 .
2 .
3. Remove the screws, then remove the sunshade rail
by sliding it backward.
ITUT
6 x l . O m m
9.8 t{.m {1.0 kgt.m,
7.2 tbf.ttl
7.
Remove the screws @ attsching the guide rail. then litt the guide rail.
8.
Remove the nut. then remove the rear rail holder.
NOTE: Remove the anchor spring.
AI{CHOR
NUT
6 x 'l.O mm
REAR RAIL
HOLDER
NOTE: Install the rear rail
the sub-seal to the trame.
SUB-SEAL
holder, then glue
SUNSHADE RAIL
SCREW
20-88