Acura 1994 Integra Service Manual page 120

Rocker Arms
Removal
Hold the rocker arms together with a rubber band to
orevent them from seParating.
Remove the intake and exhaust rocker shaft orifices,
then remove the VTEC solenoid valve and the seal-
ing bolts.
NOTE: The shapes of the rocker shaft orifices of the
intake and exhaust are different. ldentify the parts
as they are removed to ensure reinstallation in the
original locations.
INTAKE ROCKER
SHAFT OBIFICE
Clean.
O-RING
Replace.
RUBBER BAND
EXHAUST ROCKER
SHAFT ORIFICE
Clean.
O.RING
Replace.
3.
Screw 12 mm bolts into the rocker arm shafts.
Remove each rocker arm set while slowly pulling
out intake and exhaust rocker arm shafts.
ROCKER SHAFTS