Clearance Inspection - Acura 1994 Integra Service Manual

Hide thumbs Also See for 1994 Integra:

Table of Contents

Shift Fork Assembly

Clearance Inspection

NOTE: The synchro sl€€v€ and the synchro hub should

be replac€d as a set,

1. Measure th€ clearance between each shift fork and

its matching synchro sleeve.

0.35 - 0.65 mm (0.014 - 0.026 in)

S€rvico Limit 1.0 mm (0.0'l in)

lf the clearance is more than the service limit. mea-

sure the thickness of the shift fork finoers.

Standard: 7.4 - 7.6 mm (0.291 - 0.299 inl

lf the thickness of the shift fork fingers is not

within the standard, replace the shift fork with a

lf the thickness of the shift lork fingers is within

the standard, replace the synchro sleeve with a

SYNCHRO SLEEVE

Measure the clearance between the shift Diece and

the shift fork shafts.

0.2 - 0.5 mm {0.qt8 - 0.02 in]

S.rvico Limit: 0.8 mm (0.03 inl

lf the clearance is more than the service limit, mea-

sure the width of the shift piece.

Stsndard: 11.9 - 12.0 mm (0.469 - 0.472 in)

lf the width of the shift piece is not within the

standard, rsplace the shift piece with a new one.

lf the width of the shift piece is within the stan-

dard, replace the shift fork with a new one.

Show Quick Links

Chapters

Table of Contents