Acura 1994 Integra Service Manual page 192

Inspection
Remove the timing belt (81881 engine: see page
6 - 1 O , B 1 8 C 1 e n g i n e : s e e p a g e 6 - 4 9 ) .
Check that the water pump pulley turns counter-
clockwise,
Check for signs ol seal leakage.
NOTE: A small amount ot "weeping" from the
bleed holo is normal,
BLEED HOLE
2 .
J .
J .
Replacement
6 r 1.O rnm
12 N.m {1.2 kgf.m,
4.7 bf.ftl
4.
lnstall the water pump in the reverse order
removat.
NOTE:
a Keep the O-ring in position when installing.
a Clean the spilled engine coolant.
Remove the timing belt (818B1 engine: see page
6 - 1 0 , 8 1 8 C 1 e n g i n e : s e e p a g e 6 - 4 9 ) .
Remove the camshaft pulleys and the back cover
( 8 1 8 8 1 e n g i n e : s e e p a g e 6 - 1 9 . B 1 8 C 1 e n g i n e : s e e
page 6-581.
Remove the water pump by removing five bolts,
NOTE: Inspect, repair and clean the O-ring groove
and mating su.lace with the cylinder block.
DOWEL PIN
BI-EED HOI-E
10-9