Acura 1994 Integra Service Manual page 931

Rear Window
Installation (cont'd)
1 2 .
1 0 m m
{0.4 in)
With a sponge, apply a light coat ol body primer to
the original adhesive remaining around the rear win-
dow opening flange. Let the body primer dry tor at
least 10 minutes.
N O T E :
a Do not apply glass primer to the body, and be
careful not to mix up glass and body primer
sponges.
a Never touch the primed surfaces with your hands
16 mm {0.63 inl
t | n m
(O.35 Inl
Thoroughly mix the adhesive and hardener together
on a glass or metal plate with a putty knife'
N O T E :
a Clean the plate with a sponge and alcohol befole
m i x i n g .
a Follow the instructions that came with the
adhesive.
Before lilling a cartridge, cut the end of the nozzle'
as shown.
1O mm {0.39 inl
7//,
I Applv body p.lmor h.]o.
40 mm 11.6 Inl
16 mln 10.63 Inl
1 mm {0.04 inl
fu.:*1",
I J .
1 4 .
7 mm (0.27 inl
it.E\,",1/: ADHESTVE
NOTE: Apply the adhesiv€,
using the printed dots aa
a guide.
15. Pack adhesive into the cartridge wilhout air pock-
ets to ensure continous delivery. Put the cartridge
in a caulking gun, and run a bead of adhesive around
the edge of ihe rear window, as shown.
UPPER
SEAL
-C=
/ \
/
MOLDING
GLASS
5 m m
1 0 . 1 9 I n l
8 m m
10.31 inl
MOLDING
lO.Oa inl
)E--lT-*
-\
MOLDING