Acura 1994 Integra Service Manual page 651

Steering Gearbox
Removal (cont'dl
Remove the return pipe clamp from the left side of
the rear beam. and move the return piDe above the
steering gearbox.
Remove the rear beam brace.
Remove the left tie-rod end, then slide the rack
the way to the right.
1 1 .
12.
RETURN PIPE CLAMP
1 3 .
I.TFT TIE-ROD END
14. Disconnect the two lines from th€ valve bodv unit
on the steering gea.box.
CAUTION: Aftor dkconnccting tho ho3o and pip.,
plug or r.d thc ho3. rnd pipc whh I pioco of tapo
or .quivll.nt
to prcvont torcign m!tori!|3 f.om
ritrdng thc vdv. body unit.
NOTE:
. Place the pipe disconnected in the previous step
at the rear side of the gearbox so that they do
not hinder in the gearbox removal.
. Do not loosen the cylinder pipes A and B be-
tween the valve body unit and cylinder,
RETUR]T HOSE
15. Remove the steering gearbox mounting bolts.
GEARBOX MOU NNG BOLTS
17-46