Acura 1994 Integra Service Manual page 1026

Hatch Spoiler
Replacement
a Take care not to scratch the hatch.
a Open the hatch.
1. Remove the hatch side trim and hatch trim panel (see
p a g e 2 O - 1 4 6 ) .
2. Remove the nuts and disconnect the connector.
: Nut locations, 4
6 x 1 . 0 m m
Ch
9.8 N.m
(J (1.0 ksl m,
I
__.
7,4b1!t
,/
coI{t{EcroR
Remove the hatch spoiler by turning the clip nut on
the left side counterclockwise.
HATCH SPOILER
3. Installation is the reverse of the removal procedure.
Fender Well Trim and
Wheelhouse Protector
Replacement
a Take care not to bend the tender well trim.
a Before installing the lender well trim, clean the bodv
bonding surface with a sponge dampened in alcohol.
a After cleaning, keep oil, g.ease or wafer lrom getling
on the surface.
> i Scr€w locations.
I
ADHESIVE
FENDER WELL
TRIM
2 0 - 1 5 9