Front Toe Adjustment (14 117 0); General Procedures - Ford 2002 Bantam Workshop Manual

204-01-3

GENERAL PROCEDURES

Front Toe Adjustment (14 117 0)

General Equipment
Wheel alignment gauges
E1051 EN
Front Suspension
Check
1. This operation should be carried out on a
flat surface and in accordance with the
instructions for the particular Wheel
alignment gauges.
• Examine all suspension and steering
components to make sure there are no
signs of damage or wear.
• Check and, if necessary, adjust the tyre
pressure to specification.
• Make sure the vehicle is at curb weight
and that the spare wheel, jack and vehicle
tools are stowed in their designated
positions. Additional tools or goods should
be removed from the vehicle.
• Bounce the vehicle to make sure that the
suspension is in its natural position.
Adjustment
1. Center the steering wheel and lock in
position.
2. Loosen both tie rod end lock nuts.
1. Loosen the tie rod end lock nuts.
2. Remove the boot outer retaining clips.
204-01-3
06/2001 2002 Bantam