General Procedures; Powertrain/Drive Train Mount Neutralizing - Ford 2002 Bantam Workshop Manual

100-04-54

GENERAL PROCEDURES

Powertrain/Drive train Mount Neutralizing (14 001 0)

E4449 EN
Noise, Vibration and Harshness
1. NOTE: An abnormal vibration can be caused
2. Start the engine and shift into drive.
3. While the tires are in contact with the
4. Shift back into neutral and shut off the
by a component, such as an engine or
transaxle support insulator mount, which is
acting in a rigid manner because of a
distorted or twisted mounting position. As a
result, the support insulator does not absorb
vibration, as it should.
Loosen the engine insulator mounting bolts
by three turns.
ground, rock the vehicle back and forth.
engine. Retighten the engine insulator
mounting bolts.
100-04-54
02/2001 2002 Bantam