Camshaft End Play - Ford 2002 Bantam Workshop Manual

303-00-6
GENERAL PROCEDURES

Camshaft End Play

E4119 EN
Engine System — General Information
1. NOTE: Make sure that the camshaft is to
specification.
Using a Dial Indicator Gauge, measure the
endplay.
• Slide the camshaft in both directions.
Read and note the maximum and
minimum values on the Dial Indicator
Gauge.
• End play = maximum value minus minimum
value
• If the measurement is out of
specification, install new components.
303-00-6
07/2001 2002 Bantam