Ford 2002 Bantam Workshop Manual page 534

303-01D-30
IN-VEHICLE REPAIR (CONTINUED)
E5882 EN
Engine — 1.8L Diesel - Endura DE
6. NOTE: The lettering on the valve shims faces
NOTE: Installation order.
7. Turn the crankshaft a further 1 1/3 turns
8. Put the camshaft bearing shell lower halves
9. Align the camshaft.
10. Put the camshaft bearing shells upper
downwards.
Lubricate the valve tappets and valve shims
with engine oil and fit them.
until it is just before TDC.
in place and coat them with engine oil.
• Fit the camshaft and turn it until the slot
in the eccentric on the camshaft is parallel
with the upper edge of the cylinder head
(with the larger semi-circle at the top).
halves in place and coat them with engine
oil.
303-01D-30
09/2001 2002 Bantam