Exhaust Manifold (21 186 0) - Ford 2002 Bantam Workshop Manual

303-01B-58
IN-VEHICLE REPAIR

Exhaust Manifold (21 186 0)

E6639 EN
Engine — 1.6L / 1.3L RoCam
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle. For
3. Disconnect the exhaust down pipe from the
4. Lower the vehicle.
5.
6. Remove the electronic ignition (EI) coil and
additional information,
exhaust manifold and position it to one side.
1. Remove the nuts.
2. Detach the exhaust hanger insulator.
• Remove and discard the gasket.
CAUTION: Do not pull the cable when
removing the spark plug connector. If
necessary remove the ignition cables
from the ignition coil to prevent
kinking the cables. Turn the spark
plug connector slightly before
removing to loosen the seal.
CAUTION: Pull off the spark plug
connectors in line with the spark plug
(for bent spark plug connectors use
Special Tool 303-662).
Pull off the spark plug connector.
position it to one side.
07/2001 2002 Bantam
303-01B-58
refer to Section 100- 02.