Ford 2002 Bantam Workshop Manual page 875

303-14-237
DIAGNOSIS AND TESTING
Electronic Engine Controls
General Equipment
WDS
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of damage.
Refer to the following chart:
E1036 EN
Electronic Engine Controls
Visual Inspection Chart
• Damaged sensors.
• Damaged actuators.
3. If visual inspection reveals an obvious cause,
rectify this before continuing.
4. If the concern remains after visual inspection,
use WDS to diagnose the system.
Mechanical
• Damaged electrical
connections.
• Damaged wiring
harness(s).
• Loose or corroded
powertrain control
module electrical
connector.
07/2001 2002 Bantam
303-14-237
Electrical