Clutch Slave Cylinder (16 862 0) - Ford 2002 Bantam Workshop Manual

308-02-37
REMOVAL AND INSTALLATION

Clutch Slave Cylinder (16 862 0)

E1151 EN
Clutch Controls
Removal
5. Remove the transmission. For additional
information,
6. Remove the clutch slave cylinder.
1. Remove the bolts.
2. Remove the clutch slave cylinder.
Installation
4. Fit the clutch slave cylinder.
1. Coat the input shaft splines with high-
temperature grease.
2. Insert the clutch slave cylinder
3. Tighten the bolts.
All vehicles
5. Install the transmission. For additional
information,
6. Bleed the hydraulic clutch system. For
additional information,
refer to Section 308-03.
refer to Section 308-03.
refer to Section 308-00.
308-02-37
07/2001